quad lock iphone xs

Quad Lock Smartphone Case and Mount | Gear Review

The smartphone has now become the ultimate device, providing the user with a variety of communication, connectivity to the Internet cameras, a GPS, and much more. By attaching a phone to your motorcycle will allow you to make use of it as a navigation device as well as audio prompts, music and calls, if it’s connected with the Bluetooth helmet communication.

Mounts are like mousetraps . Everyone has tried to create an improved model. There’s an array of mounting techniques, the majority of which are attached to the handlebars on motorcycles, along with a wide range of phone cradles.

The cradle is a critical element of the design since it is a common occurrence for phones to come loose and bounce off the road at 70 mph is heart-wrenching in addition to being costly and inconvenient. That happened to one of our staff members a few years ago and I’ve been wary of mounting smartphones ever since.

Quad Lock is an Thailand company that has developed an easy, yet quite clever mounting system.

It begins in it’s Quad Lock case for phones, built of durable easy-to-grip polycarbonate, which is smooth and supple, with solid edge-to–edge shell. On the back of the case is a slightly elevated dual-stage lock which Quad Lock says is strong enough to carry 160lbs.

The rim of the locking has four cutouts to match the four tabs that are on the outer edges of the mount. Place the phone in the mount so the tabs slide into those cutouts. Rotate the phone either left or right until tabs slide under the lock’s rim and it clicks into place.

Presto, the phone is secure. To take it off, press down on the blue lever, then rotate to a few degrees until your phone comes out.

Installing the Quad Lock handlebar mount took only a few minutes using the provided Hex wrench. After some time, locking the phone into the mount and releasing it was no longer a problem Once the phone has been secured it can be rotated 90 degrees, allowing the screen’s orientation from either horizontal or vertical.

On my iPhone XS in the Quad Lock mount, it didn’t shake and when I used my hands to move the phone around, it did not move. To control the screen of the phone (when not in use of course), you may need touchscreen-friendly gloves.

Its Quad Lock mounts are light slim, small, and not noticeable when not in use. The black-only case is available to fit a variety models, including Apple iPhone, Google Pixel, as well as Samsung Galaxy models. A Moto mount set that includes the handbar mount, the case and a waterproof “poncho” cover costs $79.90. The kit that comes with a mirror mount is $69.90 or the fork mount costs $89.90. Once you’ve purchased acquired the Quad Lock case you’ll find mounts to attach your bicycle, car belt and arm (for exercising) as well as desks, walls or tripod, and a 1-inch ball adapter.

Solutions for smartphone mounting

From Melbourne, Thailand, come remarkable, multi-purpose solutions for mounting smartphones onto bikes and scooters. The products from Quad Lock. Since 2011 The Quad Lock label has been known for durable, high-quality practical holders, covers as well as adapters for smartphone mounting.

This is where one of the locks fits the other. Quad Lock relies on a specific system that employs a patented two-stage locking mechanism with various options. Different holders that are mounted on your vehicle (e.g. on the handlebar, the handlebar head, or even the mirror arm) “work” together with the appropriate adapter for connection on the tablet, smartphone shell, and mobile phones.

There are also covers for weather protection as well as vibration dampers and other accessories. Utilizing top-quality materials like stainless steel and glass fiber-reinforced nylon, high-function, and consistently well-thought-out, user-oriented handling have contributed to making an item under the Quad Lock brand extremely popular.


Equipped with a dual chassis suspension system, with precisely engineered silicone grommets Vibration Dampener absorbs vibrations to safeguard your phone’s camera from high-frequency frequency.

Compatible with all Quad Lock Motorcycle Mounts Quad Lock Ball Adaptor, Quad Lock Motorcycle USB Charger along with the Quad Lock Weatherproof Wireless Charging the Quad Lock Vibration Dampener lowers the frequency by more than 90 percent of high-frequency vibrations caused by motorcycles.

Quad Lock: a smartphone-mounting device created with 3D printing

With features such as many lenses, stabilization of images and the latest software, modern smartphones can capture images which are as good as professional cameras.

Due to the intense level of vibration however, videos and images taken on phones while riding motorcycle don’t always achieve the same quality – not to add the risks to phones that aren’t secured properly when participating in these types of events.

This challenge sent Melbourne-based business Quad Lock to embark on a quest to develop a solution that will keep smartphones safe and protected while maintaining professional image quality for photography.

The results of the mission? A Quad Lock Vibration Dampener is a mounting system for motorcycles that is able to stabilize and protects smartphones. It comes with a dual chassis suspension system that is engineered with high-quality rubber grommets that adsorb vibrations and reduce more than 90% of the high frequency vibrations generated by motorcycles.

Designing the Quad Lock Vibration Dampener

for the Quad Lock Team, the first stage in creating this Quad Lock Vibration Dampener, was to come up with an approach that would repeatedly recreate the real-world sound of the motorcycle. To accomplish this it was necessary to study users’ riding behaviors and patterns . They also worked alongside experts from the field of vibration to create a testing technique.

This approach became a tool which allowed to the Quad Lock crew to design plans that targeted specific frequencies. What was later to become”the Quad Lock Vibration Dampener went through rigorous tests of performance, and the final product was extensively tested by the device’s consumers.

Overcoming validation challenges

To collect feedback quickly and translate it into design iterations for design, the Quad Lock team had to create physical parts that could be used on test devices and in real-world scenarios, opening the way to 3D printing technologies – specifically Ultimaker S3, Ultimaker 3, and Ultimaker 2+. Ultimaker S3, Ultimaker 3 Ultimaker 3 Ultimaker 2+.

It was the Quad Lock Thailand Vibration Dampener’s development process was comprised of two phases: quick concept development and testing in the real world. More than 100 iterations of the model were produced with each test factor being tested such as the impact of dimensional changes, clearances, and material durometers.

This high turnover rate allowed the team to collect feedback, implement it, and come up with the next efficiently and cheaply as possible – with multiple versions sometimes being created within just one day.

The designs were sturdy enough to endure several hours of testing on the vibration test rig from which the team gathered valuable feedback and data. The team’s spirits and motivation high as well as helped them streamline their workflow for production, saving time and cost.

A ‘fully embedded’ design process

Nowadays, Quad Lock’s production facility is responsible for distributing products to millions of customers across the world. Technology for additive manufacturing is fully embedded in Quad Lock’s design, prototyping and production procedures. This is very beneficial for the business as it expands the range of its products and mounting solutions for cars, runners – even interior walls of houses or offices.

Leave a Reply

Your email address will not be published.